Lawn Feed Calculator: How Much Lawn Feed Do You Need?

A bag of lawn feed tells you how many grams to spread on each square metre. This calculator multiplies that rate by your lawn area to show how much feed to buy, how many packs that is, what it costs and how much nitrogen your lawn will receive.

Last updated 18 November 2026. Every figure on this page was checked against the sources listed at the bottom on that date.

Open the full calculator to use this tool.

How to use the calculator

  1. Type your lawn area in square metres, or measure it with the lawn area calculator.
  2. Type the rate in grams per square metre printed on your feed pack. The calculator has no default on purpose, because rates differ between products and the label is the limit.
  3. Tick the shade box if the lawn sits in shade. This halves the rate, as explained below.
  4. Add the pack size and price to see the number of packs and the cost. Add the nitrogen percentage from the label to see how much nitrogen goes on each square metre.

Does your lawn need feeding at all?

The RHS says most lawns grow perfectly well without being fed. Feeding can give a poorly growing lawn a boost, especially if you want a dense, all-grass lawn, but a relaxed or wildflower-friendly lawn does not need it. The RHS also points out that artificial fertilisers take a lot of energy to make and can harm the environment, so it advises using the minimum amount that keeps the grass in good shape.

When and how to feed

  • Spring or summer feed: apply a specific spring and summer lawn feed at the manufacturer’s recommended rate in mid-spring, while the lawn is actively growing. The RHS gives late March to April as the usual window.
  • Autumn feed: if the lawn needs a boost after summer, use a feed made for autumn.
  • Spreading: apply it evenly, ideally in cool, moist conditions when rain is expected, or water it in lightly afterwards.
  • The label rate is the limit: never apply more than the pack says.

Lawns in shade

The RHS advises feeding a shaded lawn in autumn, just before the trees lose their leaves, using an autumn feed, which is rich in potassium. A spring feed is possible about a month before the trees come into leaf, at half the rate recommended for turf in full sun. The shade box applies that halving to the rate you enter. Use it only for a spring or summer feed, not as a rule for every product.

What the nitrogen figure tells you

Lawn feed labels show the percentage of nitrogen, phosphorus and potassium, in that order. Nitrogen supports leaf growth, so it is the number most linked to how fast the grass grows. If a pack says 20 and you spread it at 35 g per m², you apply 35 × 20% = 7 g of nitrogen on every square metre. Our article on the three numbers on a bag of lawn feed explains the other two.

A worked example

Take a 49 m² lawn and a feed spread at 35 g per m². The lawn needs 49 × 35 = 1,715 g, which is 1.7 kg, so one 3.5 kg pack is enough with plenty left over. If that pack costs £12, the feed for this lawn costs £12, or about 24p per square metre. If the label says 20-5-10, the lawn receives 7 g of nitrogen per square metre and 343 g across the whole lawn. These pack figures are an example, not a recommendation: use the rate and nitrogen percentage on the feed you actually buy.

Once the lawn is fed, set the mower to the right height for the month with the mowing height guide. If you are re-seeding bare patches first, the grass seed calculator works out the quantity.

Sources