Lawn Area Calculator: Measure Your Lawn in Square Metres

Every lawn job starts with one number: how many square metres of grass you have. Seed, feed, top dressing and turf are all sold by coverage, so a wrong guess means a short bag, a wasted bag or an uneven result. This calculator adds up as many areas as you need, takes away beds and paths, and shows the total in square metres and square feet.

Open the full calculator to use this tool.

How to use the calculator

  1. Pick metres or feet. Measure everything in the same unit.
  2. Choose the shape that is closest to your first stretch of lawn and type in its measurements. The sketch shows which measurement is which.
  3. For a lawn that is not one simple shape, press Add another area and describe the next piece. Keep going until the whole lawn is covered.
  4. Mark flower beds, patios, ponds and paths as Not lawn. Their size is taken away from the total.
  5. Read your lawn area at the bottom. Copy result puts the figure on your clipboard so you can paste it into a note or a shopping list.

How to measure an awkward lawn

Most gardens are not a neat rectangle. The trick is to cut the lawn into pieces you can measure, using straight lines, then add the pieces together. An L-shaped lawn becomes two rectangles. A lawn with a curved end becomes a rectangle plus a half circle. A tapering strip becomes a trapezoid.

An L-shaped lawn split into two rectangles with a corner flower bed Rectangle A is 8 metres by 5 metres. Rectangle B sits under its left end and is 4 metres by 3 metres. A flower bed of 2 metres by 1.5 metres in the top right corner of A is taken away. A 8 m x 5 m = 40 m² B 4 m x 3 m = 12 m² bed 8 m 5 m 4 m 3 m Bed: 2 m x 1.5 m = 3 m² (taken away) Lawn: 40 + 12 = 52 m² 52 − 3 = 49 m²
An L-shaped lawn cut into two rectangles, with the corner bed taken away.

Use a tape measure or a measuring wheel and write each measurement down as you go. Curved edges only need an average: measure the straight line across the widest part and treat the curve as a half circle or an oval. If you pace the lawn out, first walk a known 10 metres and count your steps so you know your own stride length.

The formulas the calculator uses

Nothing here is hidden. These are the standard area formulas, and every result can be checked by hand.

ShapeArea formula
Rectangle or squarelength × width
Triangle½ × base × height
Trapezoid½ × (side A + side B) × distance between them
Circleπ × (diameter ÷ 2) × (diameter ÷ 2)
Half circle½ × π × (diameter ÷ 2) × (diameter ÷ 2)
Ovalπ × (longest width ÷ 2) × (shortest width ÷ 2)

A worked example

Take the L-shaped lawn in the diagram. Rectangle A measures 8 m by 5 m, which is 40 m². Rectangle B measures 4 m by 3 m, which is 12 m². Together that is 52 m² of lawn. A flower bed in the corner measures 2 m by 1.5 m, which is 3 m². Take it away and the lawn area is 49 m². Enter the same three areas in the calculator and it returns 49 m², or about 527 square feet.

Metres, feet and square units

One foot is exactly 0.3048 metres, so one square metre is 10.7639 square feet. The calculator converts your measurements to metres first and adds them up, so mixing shapes never costs accuracy. Coverage on seed, feed and top dressing packs is usually printed in square metres in the UK. If you measured in feet, use the square metre figure when you compare packs.

Do not mix units inside one calculation. A lawn that is 10 m long and 20 ft wide cannot be multiplied as it stands. Measure every length in the same unit before you enter it.

What to do with your lawn area

Once you have the number, check the coverage printed on the pack and divide your area by it to see how many packs you need. Buy slightly more than the sum gives, because edges and uneven ground use more than flat geometry suggests. The calculators below take your area and do the rest: how much grass seed you need, how much lawn feed to buy, how much top dressing or turf to order, and how high to set the mower. Our guides on seeding a lawn, reading the numbers on a bag of lawn feed and top dressing a lawn explain how to apply each one.

Accuracy and limits

The result is only as good as the measurements. A tape measure on a flat lawn is accurate to a few centimetres, which is plenty for ordering seed or feed. Slopes are measured along the ground, not as a flat plan, so a steep bank holds more grass than its map outline suggests. For a very large or irregular lawn, a free online map with a measuring tool is a useful cross-check.